Advanced Applications
39 Pulse-Width Modulation
Emulator X / Proteus X - Advanced Applications Guide 129
Connect the Modulation Cords
28. Select the Voice Processing page from
your new preset (P1025) in the Tree. The
voice processing page appears.
29. Set up the Cords as shown at left. You only
need to change two parameters. Set Cord
3’s destination to LFO
~
to Sample Loop,
and change the Amount of Cord 4 to -2.00.
30. Play the keyboard and turn up the Mod
Wheel. You should now be hearing rich,
luscious pulse width modulation.
31. You might want lower the frequency of
LFO 1 for a better chorale effect.
Comments to this Manuals